| Description | The SAP list indicates which SAPs are advertised to
the transport connection defined by the local peer whose
transport address is given by ciscoDlswTConnConfigLocalTAddr.
The SAP list is configured on the local peer, and the SAP list
is sent to other peers via capabilities exchange.
The SAP list represents the SAPs specified via the configuration
command:
dlsw icanreach saps X
or
dlsw icannotreach saps X
Where X is in the range 0-FE.
Only SAPs with even numbers are represented,
in the form of the most significant bit of the first
octet representing the SAP 0, the next most significant
bit representing the SAP 2, to the least significant
bit of the last octet representing the SAP 254. Data
link switching is allowed for those SAPs which have
one in its corresponding bit, not allowed otherwise.
The whole SAP list has to be changed together. Changing
the SAP list affects only new circuit establishments
and has no effect on established circuits.
This list can be used to restrict specific partners
from knowing about all the SAPs used by DLSw on all its
interfaces (these are represented in ciscoDlswIfSapList for
each interface). For instance, one may want to run NetBIOS
with some partners but not others.
If a node supports sending run-time capabilities exchange
messages, changes to this object should cause that action.
It is up to the implementation exactly when to start the
run-time capabilities exchange.
The DEFVAL below indicates support for all SAPs. |