MIB Discovery
1930 modules enregistrés
Chemin
MIX : 1 (iso). 3 (org). 6 (dod). 1 (internet). 4 (private). 1 (enterprises). 9 (cisco). 9 (ciscoMgmt). 314 (ciscoCasIfExtMIB). 1 (ciscoCasIfExtMIBObjects). 6 (ccasIfExtGeneralConfig). 1 (ccasIfExtGeneralConfigTable). 1 (ccasIfExtGeneralConfigEntry). 5 (ccasGCnfLineSigType)
OID : 1.3.6.1.4.1.9.9.314.1.6.1.1.5
TXT : iso. org. dod. internet. private. enterprises. cisco. ciscoMgmt. ciscoCasIfExtMIB. ciscoCasIfExtMIBObjects. ccasIfExtGeneralConfig. ccasIfExtGeneralConfigTable. ccasIfExtGeneralConfigEntry. ccasGCnfLineSigType
Enfants
Pas d'enfants disponibles pour cet OID
Détails
OID1.3.6.1.4.1.9.9.314.1.6.1.1.5
Module CISCO-CAS-IF-EXT-MIB (CISCO)
NomccasGCnfLineSigType
Accesreadwrite
Statuscurrent
Description This object specifies the line signaling type that will be used for the R2 line signaling. . digital (1): The digital line signaling is typically used for PCM systems. Only A and B bits are used to indicate line signaling states, while C and D bits may be optionally used. . analog (2): The analog line signaling is typically used for carrier systems. Only A bit is used to represent tone-on and tone-off indication to signal the line signaling states, while the B, C, and D bit are fixed. . pulse (3): The Pulse type line signaling is typically used for satellite links. It uses tones sent as pulses to indicate line signaling states.
SyntaxeEnumeration (1-digital, 2-analog, 3-pulse)